Support – Phone Orders : 00359896643674

Hexagon19
ELECTROHYDRAULIC LIFT 4 TONS

ELECTROHYDRAULIC LIFT 4 TONS

2,450.00

ELECTRIC HYDRAULIC LIFT 4 TONS WITOUT BASE

Category:

Description

Wide range of applications
Thanks to the lifting capacity of up to 4 tons, the lift works not only in passenger cars but also in larger trucks.
Before buying a lift, make sure you check the position of the support points on the vehicles you want to operate.

The advantage of automatic lifting is the easy control of the lifting and lowering process using the buttons on the control panel without having to release the lock manually in each column. In this model, both lift columns have electromagnets that automatically deactivate the locks when the lower control panel button is pressed.

Advantages of the upper beam
This lift is ideal for cars with low ground clearance. The columns are connected via an upper beam via steel timing ropes and a hydraulic conductor. An additional advantage of the elevator with the “upper beam” is the comfort of work – the movement, for example, a gearbox under a raised car takes place without obstacles. This is a significant advantage over bottom linkage lifts, which have to be exceeded at a high level, usually preventing smooth transport or other components of this type.

Security first

The elevator has a so-called terminal switch, which prevents the body of the car being crushed from being crushed, for example due to excessive lifting. This protection is located on a special rod suspended on the upper beam (in a soft cover). When the car reaches its maximum height and touches the soft stick with the roof, the end switch will operate, stopping the lifting process.

Door edge protection
The lift body is equipped with a door protection rubber, which protects the edge of the car door when opened in the lift.

Long-term durability H
Perfect quality components (durable chain and controls) and careful construction guarantee reliable use for many years. In addition, we have all the standard components for this elevator, such as rubber, plumbing or electronic components.

General
Lifting The lifting arms are asymmetrical (the front is smaller, the rear is larger) and they fold outwards, which allows the optimal balance of the lifted vehicle to be maintained. In addition, the arms have a telescopic adjustment level so you can easily adjust the appropriate place to support the car.

Complete documentation (from the seller) O.
The elevator has the necessary documentation that the seller must provide registration to the technical inspection office, ie CE certificate of compliance, instruction manual in English, elevator quality control report after assembly.

Remember to submit documents next to this documentation to the Technical Inspection Office.

Soil preparation
Basic requirements for soil preparation for the installation of a two-axis elevator:

ground surface 1.5 m x 4 mx 30 cm
maximum flat surface
minimum floor thickness: 20 cm
Class B25 concrete
28 days, waiting time for the floor to dry

The floor must be in the form of a homogeneous concrete slab with the above parameters.

Hexagon 19 ltd

Plovdiv
Municipality of Plovdiv,
Plovdiv 4020 (center),
45 Miladivovi dross street.
Bulgaria

email: hexagon19ltd@gmail.com
Τηλ.: 0035 9896 643674

All our prices are listed WITHOUT VAT. At the Completion of your purchase, the VAT is automatically updated.

Top